Call of Duty 5: Dynamic Foliage: Difference between revisions

From COD Modding & Mapping Wiki
Jump to navigation Jump to search
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[Image:nutshell.png]] This tutorial will show how to create Dynamic Foliage in COD:WAW. Tutorial and script by Zweimann<br>
[[Image:nutshell.png]] This tutorial will show how to create Dynamic Foliage in COD:WAW. Credits for Tutorial and Script goes to Zweimann<br>
 
[[Image:rgn_warning.png|right]]
= Intro =
= Intro =


Line 25: Line 25:
<pre>targetname: dyn_grass</pre>
<pre>targetname: dyn_grass</pre>
<br>
<br>
== TIPS ==
It can be a long task to change all your misc_models into script_model and add the targetname so here is one way to do it quicker:
[[Image:Information.png]]Make a backup of your .MAP files before starting this Tutorial in case something goes wrong!<br>
*Select one of the model you wish to have dynamic - for this example lets say the model is called '''foliage_cod5_tallgrass10a'''
*Bring up the Entity properties using n
*Highlight the K/V ''Model/foliage_cod5_tallgrass10a''
*Close the Entity properties by pressing n again
*Now go to Selection > Select by Key/Value (or use shorcut SHIFT-CRTL-F):
[[File:Dynamic foliage tut 01.jpg]]
*After you click you will see that the Key Model and Value '''foliage_cod5_tallgrass10a''' will be already filled in, click OK
[[File:Dynamic foliage tut 02.jpg]]
*This will now select all the other Model called ''foliage_cod5_tallgrass10a'' in the level
*Bring up the Entity properties using n
*Now you can change '''misc_model''' Key to '''script_model''' (highlight it first then edit)
*After this you can add the new K/V:
<pre>
Key: Targetname
Value: Dyn_foliage
</pre>
[[File:Dynamic foliage tut 03.jpg]]
[[Image:Information.png]] Script_models do not support Modelscale!! Make sure to reset to 1 or remove the modelscale K/V if any and replace the models accordingly on ground.<br>
*You can now press Enter to complete and keep going with other models
*Remember to keep an eye on the number of script_model using M:
[[File:Dynamic foliage tut 04.jpg]]


= Scripting =
= Scripting =


*Create a new file in raw/maps/mp/gametypes called _dynamic_foliage.gsc
*Create a new file in raw/maps/mp/ called _dynamic_foliage.gsc
*Open it with Notepad and copy/paste the following script:
*Open it with Notepad and copy/paste the following script:


Line 247: Line 282:


<pre>
<pre>
maps\mp\gametypes\_dynamic_foliage::initdfs();
maps\mp\_dynamic_foliage::initdfs();
</pre>
</pre>


Line 257: Line 292:


<pre>
<pre>
rawfile,maps/mp/gametypes/_dynamic_foliage.gsc
rawfile,maps/mp/_dynamic_foliage.gsc
</pre>
</pre>



Latest revision as of 13:15, 14 September 2010

This tutorial will show how to create Dynamic Foliage in COD:WAW. Credits for Tutorial and Script goes to Zweimann

Intro

By Zweimann
This is an easy way to have Dynamic Foliage in your custom map. Only 2 Steps. This code works and needs no mod, so your map runs dynamic foliage as a standalone block.
This is what you get:

<videoflash>KVA0p7SGorA</videoflash>

Preparation and Radiant

  • Change your misc_models (Trees and Palms, Foliage and grass) to script_models.
  • Choose between 3 different targetnames for them (can be any of them but changes must be reflected in the script in next Step):

Trees and palms:

targetname: dyn_trees

Big Foliage:

targetname: dyn_foliage

Grass and tiny foliage:

targetname: dyn_grass


TIPS

It can be a long task to change all your misc_models into script_model and add the targetname so here is one way to do it quicker:

Make a backup of your .MAP files before starting this Tutorial in case something goes wrong!

  • Select one of the model you wish to have dynamic - for this example lets say the model is called foliage_cod5_tallgrass10a
  • Bring up the Entity properties using n
  • Highlight the K/V Model/foliage_cod5_tallgrass10a
  • Close the Entity properties by pressing n again
  • Now go to Selection > Select by Key/Value (or use shorcut SHIFT-CRTL-F):

  • After you click you will see that the Key Model and Value foliage_cod5_tallgrass10a will be already filled in, click OK

  • This will now select all the other Model called foliage_cod5_tallgrass10a in the level
  • Bring up the Entity properties using n
  • Now you can change misc_model Key to script_model (highlight it first then edit)
  • After this you can add the new K/V:
Key: Targetname
Value: Dyn_foliage

Script_models do not support Modelscale!! Make sure to reset to 1 or remove the modelscale K/V if any and replace the models accordingly on ground.

  • You can now press Enter to complete and keep going with other models
  • Remember to keep an eye on the number of script_model using M:

Scripting

  • Create a new file in raw/maps/mp/ called _dynamic_foliage.gsc
  • Open it with Notepad and copy/paste the following script:
///////////////////////////////////////////////////////////
// Dynamic Foliage v.1 for CoD:WaW & CoD:MW
// Coded by Zweimann ( [email protected] )
// This code has been written to enhance the ingame experience,
// adding dynamic scenarios instead of static ones.
///////////////////////////////////////////////////////////
#include maps\mp\_utility;
#include common_scripts\utility;

// ---------------------------------------------------------------------
// Init Script
// ---------------------------------------------------------------------

initdfs()
{
	println("^1Initializing Zweimann's Dynamic Foliage System");

	// There should be three different script_models: trees, foliage and grass, because they're
	// treated in a different way.
	// Consider Grass to grass (obviously) and to very small foliage elements
	// Consider Foliage to midsize foliage
	// classname: script_model
	// targetname: <name>
	// These names were used in Burma 1.1. Change them to whatever you want
	level.dfs_tree_sm_name = "dyn_trees";
	level.dfs_foliage_sm_name = "dyn_foliage";
	level.dfs_grass_sm_name = "dyn_grass";

	// You must set up here Strength of Wind, to simulate higher or lower sway
	// on foliage and trees.
	// 0 means no wind @ all
	// 10 means A HURRICANE : )
	// Recommended values: 0.3 to 0.6. Optimal value: 0.5;
	// Obviously you can setup a dvar or whatever for this

	level.dfs_wind_strength = 0.5;
	// Let's start

	foliage_animation();
	grass_animation();
	tree_animation();
}

// -----------------------------------------------------------------
// Main Scripts
// -----------------------------------------------------------------

tree_animation()
{
	level endon("game_ended");
	// Sway animation for Trees
	// Slower, softer

	entities = getentarray( level.dfs_tree_sm_name, "targetname" );

	vpoint = level.dfs_wind_strength / 1.4;
	vangles = level.dfs_wind_strength / 1.5;
	vtime = ( 6 * ( 1 - level.dfs_wind_strength ) );

	for( i = 0; i < entities.size; i++ )
		{
			factor = randomIntRange( 0, 10 );

			if ( factor >= 5 )
			mmfactor = 1;
			else
			mmfactor = -1;

			vibvector = entities[i].origin + ( ( vpoint * mmfactor ), 0, 0 );
			entities[i] vibrate( vibvector, vangles * mmfactor , vtime, ( ( level.timelimit * 1.2 ) * 60 ) );
			// Tree is damageable now
			entities[i] setcandamage(true);
			// Trees are destroyable, so let's start their threads
			entities[i] thread treethreads();
			wait 0.005;
		}
	}

foliage_animation()
{
	level endon("game_ended");

	// Sway animation for Foliage
	// Stronger
	entities = getentarray( level.dfs_foliage_sm_name, "targetname" );
	vpoint = level.dfs_wind_strength * 1.5;
	vangles = level.dfs_wind_strength * 2;
	vtime = ( ( 1 - level.dfs_wind_strength ) ) * 5;

	mmfactor = 1;

	for( i = 0; i < entities.size; i++ )
	{
		mmfactor *= -1;
		vibvector = entities[i].origin + ( randomFloatRange( 0,90 ) * mmfactor , 0, 0 );
		entities[i] vibrate( vibvector, ( vangles * mmfactor ) , vtime, ( ( level.timelimit * 1.2 ) * 60 ) );
		wait 0.005;
	}
}

grass_animation()
{
	level endon("game_ended");

	// Sway animation for Grass
	// Strongest
	entities = getentarray( level.dfs_grass_sm_name, "targetname" );

	vpoint = level.dfs_wind_strength * 2;
	vangles = level.dfs_wind_strength * 4;
	vtime = ( ( 1 - level.dfs_wind_strength ) ) * 2.5;

	mmfactor = 1;

	for( i = 0; i < entities.size; i++ )
	{
		mmfactor *= -1;
		vibvector = entities[i].origin + ( ( vpoint * mmfactor ), 0, 0 );
		entities[i] vibrate( vibvector, ( vangles * mmfactor ) , vtime, ( ( level.timelimit * 1.2 ) * 60 ) );
		wait 0.005;
	}
}

treethreads()
{
	level endon("game_ended");
	self endon("broken");

	while( !isDefined(self.broken) )
	{
		// You can even play with tagName if you place Trees/Palms with more than one tag
		// Trees could be burned, broken and more.
		// By the moment, they're destroyed and sunk down

		self waittill("damage", damage, attacker, direction_vec, point, mod, modelName, tagName);

		if ( mod != "MOD_RIFLE_BULLET" && mod != "MOD_PISTOL_BULLET" && mod != "MOD_MELEE" )
			if ( damage > 50 )
				self treefall();
	}
}

// Code below is originally from CoD:WaW scripts
// Modified by Zweimann to fit our requirements

treefall()
{
	yaw = randomint(360);

	break_angles = (self.angles[0], yaw, self.angles[2]);
	break_vector = anglesToForward(break_angles);
	break_vector = vectorScale(break_vector, 100);
	start = (self.origin + break_vector) + (0, 0, 512);
	end = start + (0, 0, -1024);
	trace = bulletTrace(start, end, false, self);
	dist_vector = ((self.origin + break_vector) - trace["position"]);
	dist = dist_vector[2];
	velocity = 0;
	travelled = 0;
	lasttravelled = travelled;
	count = 0;
	lastcount = count;

	while(travelled < dist)
	{
		velocity = velocity + 340;
		lasttravelled = travelled;
		travelled = travelled + velocity;
		lastcount = count;
		count++;
	}
	remainder = lasttravelled - dist;
	if(remainder < 0)
	remainder = remainder * -1;

	if ( velocity != 0 )
	time = lastcount + (remainder / velocity);
	else
	time = lastcount;
	self moveGravity(break_vector, time);
	self waittill("movedone");
	vec = vectorNormalize(break_vector);
	vec = vectorScale(vec, 320);
	start = (self.origin + vec) + (0, 0, 1024);
	end = start + (0, 0, -1024);
	trace = bulletTrace(start, end, false, self);
	ground = trace["position"];
	treeup_vector = anglesToUp(self.angles);
	treeup_angles = vectortoangles(treeup_vector);
	rest_vector = ground - self.origin;
	rest_angles = vectorToAngles(rest_vector);
	treeorg = spawn("script_origin", self.origin);
	treeorg.origin = self.origin;
	treeorg.angles = (treeup_angles[0], rest_angles[1], rest_angles[2]);

	self linkto(treeorg);

	treeorg rotateTo(rest_angles, 1.15, .5, 0);
	treeorg waittill("rotatedone");
	treeorg rotatepitch(-2.5,.21,.05,.15);
	treeorg waittill("rotatedone");
	treeorg rotatepitch(2.5,.26,.15,.1);
	treeorg waittill("rotatedone");
	self unlink();

	self.broken = 1;
	self notify("broken");
	self setcandamage(false);

}
  • Save the file, now open your Main Map GSC File and just before the final } add this line:
maps\mp\_dynamic_foliage::initdfs();
  • Save the file

Zone File

  • Add the following line to your Zone File:
rawfile,maps/mp/_dynamic_foliage.gsc
  • Enjoy a new CODWAW Experience!

Limitations

Just like Spawns the script_models are Entities and therefore have a limit - most likely to be 1024. The maximum number of Script_models so far tested is 576.
You can check the number of entities you have in a level by hitting M when in Radiant.